Safe and effective working on telegraph poles with the modular ZARGES ladder system.

• The highest degree of industrial safety through double-stile ladder construction and integrated fall arrester system.
• Advanced arrester system ensures permanent safety, even during setup.
• Wide rungs, 30 mm deep for optimum protection against slipping when climbing and descending.
• Strong ZARGES quality triple-formed joints connect rung and stile.
• The double-stile construction allows easy transportation, stacking and storage of the modules.
• Low-wear attachment to the pole through the use of special fasteners (braided rope and stand-off bracket with plastic protection).
• High flexibility with regard to height (max. 20.00 m) and mast diameter (ø 140 mm to 1000 mm).
• The set-up time for a pole with a length of 15.00 m is approx. 10 minutes.
• Maximum total load 150 kg per ladder system / set.
• The entire ladder system is tested to DIN EN 353 CE 0121, DIN 18  799-1, DIN EN ISO 14 122-4, DIN EN 131. Compliance with these standards is tested and certified by DEKRA.
• Weight-optimised aluminium arrester rail.
• ZAST-OPTIFLEX safety slide mechanism with flexible application options, can be inserted and removed, observing the safety regulations, at any point in the fall arrester system - mandatory when using the ZARGES ladder system, not included in the scope of delivery of the ladder system. The ZAST-OPTIFLEX safety slide mechanism is available as an accessory, Order No.. 47588.
• Safety slide mechanisms and safety harnesses must be used at heights above 5.00 m.