Z600 Standard mobile scaffold tower with chassis beams
Starter model with narrower chassis beam and small (non-height-adjustable) castors at a limited working height.
- Scaffolding width: 0.75 m; scaffolding length: 1.80 m.
- Working heights can be extended from 4.10 m to max. 7.35 m with standard parts.
- Scaffolding category 3 (can be loaded up to 200 kg/m²) according to DIN EN 1004, i.e. here with 270 kg.
- Standard castors: 125 mm with journal (non-height-adjustable).
- Can be replaced as required with height-adjustable castors (dia. 200 mm: 42917 or 125 mm: 42973) for an additional charge.
- Ballast weights not included in the scope of delivery
- ¹) In the case of side erection, the higher ballasting is on the side facing away from the wall.
- For 51922 (working height 4.10 m): The ballasting is reduced to 1 for each swivel castor when chassis beams are used.
- Push-on tubes (42919) must also be used in the event of over 4 ballast weights for each swivel castor.
- Observe ballasting regulations in the instructions for erection and use.
ZARGES Z600
| Working height (ca. m) | 4,10 | 5,40 | 6,20 | 7,35 |
|---|---|---|---|---|
| Overall height (m) | 3,10 | 4,40 | 5,20 | 6,35 |
| Platform height (m) | 2,10 | 3,40 | 4,20 | 5,35 |
| Platform size (m) | 0,75 x 1,80 | 0,75 x 1,80 | 0,75 x 1,80 | 0,75 x 1,80 |
| Weight (kg) | 68,7 | 108,4 | 113,7 | 145,2 |
| Model no. | 51922 | 51932 | 51942 | 51952 |
| notice a product |
 |
|
|
|
| accessory |
